1270-15W Fiber-Coupled Laser Module

The 1270-15W is a fiber-coupled semiconductor laser module with ≥15 W continuous-wave optical output at 1270 ± 10 nm. The specified output connection combines a 400 μm fiber with an SMA905 connector.

Specifications

1270 nm 15 W fiber-coupled laser module

Technical specifications

Wavelength	1270 ± 10 nm
Output	≥15 W
Mode	CW
Package	Fiber-coupled module
Power basis	Continuous-wave optical output
Spectral width	≤8 nm
Pulse / duty	Continuous wave
Interface	400 μm fiber / SMA905
Drive	7 A / <10 V
Thermal control	20–30 °C

The spectral width is ≤8 nm. Listed electrical drive is 7 A / <10 V, with thermal control at 20–30 °C. These specifications allow the optical connection, driver and cooling arrangement to be reviewed as separate integration requirements. The ≥15 W rating is retained as a lower-bound optical-output specification, rather than rewritten as an exact value.

Application and integration notes

Application areas include solid-state laser pumping and optical-communications development. For a configuration inquiry, specify the required optical output, fiber routing, mating connector and available thermal-control arrangement. Confirm the fiber assembly details and output measurement conditions before finalizing the host design. No temperature-drift coefficient, lifetime or conversion-efficiency guarantee is stated.

Optical acceptance and configuration

For incoming inspection, agree where fiber-delivered power is measured and how the operating conditions are controlled. Specify the required fiber length and numerical aperture, connector mating arrangement and any routing limits for technical confirmation. The optical output rating and the driver requirements are separate checks; a connector match alone does not establish compatibility with the complete optical system.